FPVCYCLE TP3

Features:

• Multi Unit design
• T700 carbon in 0.5mm laminate thickness (thinner is better, typical is 1.5mm)
• ~9-10g built frame base with hardware (some variation)
• 1.5mm body plates, 2.5mm arms
• Accepts 1”x1” typical whoop mounting platform
• Good quality carbon but no chamfers to keep costs down
• Made to be used. Not a shelf ornament.
• Every line on this design is very delicately crafted for optimization
  
  ARM BRACES INCLUDED
• The optional cross bars are intended to improve durability for those that put their quads through the punishment of racing.  The cross bars weigh 1.3g ea, are made of 2.5mm carbon and you will need 7mm long M2 screws to mount the motors after installing.

Multi Unit design benefits:

• Repairability when you smash it
• Skinnier arms for less thrust deflection and rotational drag
• Similar weight to a monobody of the same or lesser durability
• Cheaper to maintain
• Easier to repair and maintain
• Doesn’t ruin your flying day due to a crash

Included parts:

• 5x arms 
• 1x lower body plate
• 1x top and FC mounting plate
• 1x Hardware Kit (See below)
• 2x Arm Brace
• About ~10x rubber bands
• NO MORE TPU CENTER!

Hardware:

• 5x M2x6mm steel 10.9 hardness socket cap
• 4x M2x16mm steel 10.9 hardness socket cap
• 4x M2x20mm steel 10.9 hardness socket cap
• 5x M2 steel locknut
• 5x M2 press nuts (installed)